Mackie Thump 12A

Mackie Thump 12A

$389.99
$299.99 & FREE Shipping
Out of Stock

Feature:

Electronics > Audio > DJ & Specialty Audio
The Mackie TH-12A Powered Loudspeaker delivers proven Mackie performance and quality in a portable design that delivers real-world power with superior midrange for vocal and acoustic applications.
 
Efficient Class-D Fast Recovery™ amplification provides 400 watts of total system power, tuned to perfectly match the custom-designed 12˝ high-precision woofer and 1˝ compression driver. The TH-12A delivers the Thump you demand and all the tools you need, including user-adjustable 3-band EQ and Mackie Active electronics for total system optimization.
 
Powerful, punchy and ultra-affordable, the TH-12A is the best powered loudspeaker option for your hard-earned money.
 

Features

  • 400W of ultra-efficient Fast Recovery amplificationLF 300W peak power (Class-D) HF 100W peak power (Class A/B)
  • High-output transducers 12" or 15" high-precision woofer1" compression driver
  • Mackie Active electronics provide total system optimization Precision 2-way crossoverTransducer time-alignment
  • User-adjustable 3-band contour EQ with sweepable mid-frequency
  • Mic/Line input for direct connection of single microphone
  • Tough, impact-resistant polypropylene enclosure
  • Pole-mountable and floor wedge-able

 

Thump Series TH-12A 12" 2-Way Powered Loudspeaker Specifications:

  • Acoustic Performance
  • Frequency Range (–10 dB): 57 Hz – 20 kHz
  • Frequency Response (–3 dB): 70 Hz – 18.5 kHz
  • Horizontal Coverage Angle: 90°
  • Vertical Coverage Angle: 60°
  • Maximum SPL Long-Term: Maximum SPL Peak: 112 dB SPL @ 1m 115 dB SPL @ 1m
  • Input/Output
  • Input Type: Female XLR Balanced / Unbalanced
  • Input Impedance: 20 kbalanced bridging; 10 k unbalanced
  • Loop-through: Male XLR Balanced / Unbalanced (parallel with input)
  • Level Control: Rotating knob 0 dB at center
  • Sensitivity:
    +4 dBu for full output (Level Control @ Center)
    –36 dBu for full output (Level Control @ Max)
  • Transducers
  • Low Frequency: 12 in / 381 mm with steel frame, paper cone woofer
  • High Frequency: Horn-loaded 1 in / 25 mm exit compression driver
  • Low Frequency Power Amplifier
  • Rated Power:
    150 watts, 8 ohm load
    300 watts peak
  • Signal-to-Noise Ratio: > –94 dB, 20 Hz to 20 kHz, unweighted,
  • referenced to 138 watts into 8 ohms
  • Design: BTL Class D
  • High Frequency Power Amplifier
  • Rated Power:
    50 watts, 4 ohm load
    100 watts peak
  • Signal-to-Noise Ratio: > –97 dB, 20 Hz to 20 kHz, unweighted, referenced to 50 watts into 4 ohms
  • Design: Class AB
  • Electronic Crossover
  • Crossover Type: 24 dB/octave
  • Crossover Frequency: 3 kHz
  • Equalization
  • Low Frequency EQ: ±15 dB @ 80 Hz, shelving
  • Mid Frequency EQ: ±15 dB, bandpass, sweepable from100 Hz to 8 kHzHigh Frequency EQ: ±15 dB @ 12 kHz, shelving
  • Direct/EQ Switch: Bypasses EQ section
  • Protection Features
  • Over-excursion Protection: Second-order sub-sonic filter
  • Thermal Protection: Independent amplifier shutdown, auto reset
  • Driver Protection: Independent HF and LF compressors
  • AC Power Requirements
  • US: 100 – 120 VAC, 50 – 60 Hz 320 watts
  • EU, CN: 200 – 240 VAC, 50 – 60 Hz 320 watts
  • AC Connector: 3-pin IEC 250 VAC, 20 A male
  • Construction Features
  • Basic Design: Asymmetrical Trapezoidal
  • Material: Polypropylene
  • Finish: Textured
  • Handles: One on each side, one on top
  • Grille: Perforated metal with weather-resistant coating
  • Display LEDs
    Front: Power ON
    Rear: Power ON, OL (overload)
  • Operating Temperature:
  • 0° – 40° C (32 ° – 104° F)
  • Physical Dimensions and Weight
  • Dimensions
  • Height: 23.5 in / 596 mm
  • Width: 14.5 in / 367 mm
  • Depth: 12.4 in / 314 mm
  • Weight: 25.5 lb / 11.6 kg
  • Mounting Methods: Pole-mountable via the built-in socket on the bottom of the cabinet. Be sure the pole is capable of supporting the weight of the TH-12A.
 
There are no reviews for this product!

Related Items

Recently Viewed Items

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Top